Adding a camera

From the Detect Map View main toolbar, select Administrator > Edit > Camera Systems. The Camera Systems window will open.

1 Select the desired site for the camera that will be added into in the Cameras window. Click on the map to enter the Latitude and Longitude. In this example, our camera will be added into the Front site and has latitude and longitude of 34.00302..., -117.34024...

2 Click the Camera button.

A Camera Parameters window will be displayed.

3 Enter the name, IP address, and other information. Details about the NVR parameters can be found in Configuring the NVR.

In our example, the camera will be named Corner PTZ, with an IP address of 172.16.10.12, and camera type of SightLogix.

Note: Your Leverage rep will handle most of the camera configuration.The three-digit ID number is used in conjunction with the Samsung Joystick.

4 Once the parameters are entered, Click OK. The camera is now active and an icon is visible at the site it was created.